Standard: ASTM, AISI, DIN, EN, GB, JIS
Technique: Hot Rolled/Cold Rolled/Galvnized
Processing Service: Welding, Punching, Cutting
Available Size Range: Click here
Get A QuoteEssential details
AISI 632 - 15-7PH is a semi-austenitic precipitation hardening stainless steel. With a high strength and hardness rate and good corrosion resistance, it's a reliable and cost-effective solution for a variety of applications. In conditions TH 1050 and RH 950. it offers greater corrosion resistance than standard hardenable chromium types 400 series stainless steels.
| Equivalent grades | • AISI 632 • 15-7PH • UNS S15700 • W.Nr. 1.4532 • X8CrNiMoAl15-7-2 • Type 15-7MO |
| Chemical Composition Reference | 0.1C-0.7Si-1.2Mn-0.04P-0.015S-14~16Cr-6.5~7.8Ni-2~3Mo-0.7~1.5Al |
| Physical Property Reference | • Density: 7.81 g/cm³ • Tensile Strength: 900-1100 MPa • Yield Strength: 1000 MPa • Melting Point: 1350– 1450°C • Elogation: 15% |
| Stock & Dimensions | Our warehouse has a large number of stock to provide you with a variety of products in different sizes, and can also customize the size according to your needs. • Bar: 0.5~600mm Diameter • Coil: 0.5~150mm Thick • Plate: 0.5~200mm Thick • Pipe: 6~630mm External Diameter; 0.5~40mm Wall Tick • Available in specific sizes |
| Product Forms | We provide you with a variety of product forms, including but not limited to: Bar/Rod, Pipe/Tube, Coil/Strip, Plate/Sheet/Circle, Wire, Fitting (Flange, Elbow, Tee...), Customize |
Typical Applications:
- Springs
- Retaining rings
- Diaphragms
- Aircraft bulkheads
- Welded and brazed honeycomb paneling
- Aircraft components
Products
Phone
